Search results for "Petroleum engineering"
showing 10 items of 36 documents
The impact of the volumetric swelling behavior on the water uptake of gas shale
2018
Abstract Water uptake of gas shales is commonly considered one of the most important factors responsible for fluid loss during flowback operations after hydraulic fracturing. Imbibition experiments cover a key role in this context to analyze the impact of several factors (such as mineralogical composition, fluids composition, anisotropic structure, volumetric swelling) that contribute to the water uptake in these unconventional reservoirs. The aim of this study is the quantification of the impact of the volumetric response (swelling and shrinkage) of gas shales on the water uptake during imbibition and desiccation processes. An experimental methodology to quantify the volumetric response du…
A practical approach to estimate the degree of binder activity of reclaimed asphalt materials
2019
Using Reclaimed Asphalt (RA) in new asphalt mixtures can reduce the amount of new material required thereby saving money and natural resources. In addition, asphalt mixtures with RA have shown comparable properties and performance to that generally associated with asphalt mixtures made with 100% virgin material. However, RA content in pavement surface layers is still limited due to specification and technical limitations. For higher contents, the aged RA binder must be analysed to accurately determine the requirements for virgin binders and additives while the degree of blending (DOB) between the RA binder and the virgin binder also needs to be quantified. This is not a simple process and g…
One-dimensional compression and consolidation of shales
2016
This paper presents a comprehensive methodology for analysing the compression and consolidation behaviour of shales. An apparatus was designed to perform oedometric high-pressure tests by applying a maximum vertical total stress of 100 MPa and simultaneously controlling the pore water pressure of the specimen. An analytical method was formulated to analyse the shale consolidation behaviour, which allows information to be gathered on the coefficient of consolidation, stiffness, poroelastic properties, secondary compression and permeability of the tested material as a function of the applied stress conditions. Results obtained on Opalinus Clay shale using the developed methodology are present…
Experimental assessment of the hydro-mechanical behaviour of a shale caprock during CO2 injection
2021
Abstract The presented experimental study focuses on the hydro-mechanical characterisation of a shale caprock (Opalinus Clay) in contact with carbon dioxide. The objective of this paper, consists in the evaluation of the material's sealing capacity in terms of entry-pressure, mechanical behaviour and sensitivity of the transport properties to chemo-mechanical effects induced by gaseous and liquid CO2 injection. Two types of Opalinus Clay core samples are tested; shaly and carbonate-rich. The sealing capacity has been evaluated on the shaly OPA according to the stepwise and the residual methods and compared to the results from mercury intrusion porosimetry. The obtained results and the diffe…
Automatic Operation and Control of a Novel Coalescing Centrifugal Pump for Improved Oil/Water Separation
2019
Summary In this paper we present the development and implementation of automatic operation and control for a pump/hydrocyclone produced-water-treatment system to maximize oil/water-separation efficiency. A so-called perturb-and-observe (P&O) algorithm is adapted for a novel centrifugal pump to continuously optimize the point of operation. The novel pump coalesces and increases the size of oil droplets in the produced water, resulting in a unique relationship between the coalescing effect and the point of operation, and allowing for the successful implementation of the P&O algorithm. The algorithm was implemented in two different setups, one measuring the droplet-size distribution be…
Numerical and Experimental Investigation of Equivalence Ratio (ER) and Feedstock Particle Size on Birchwood Gasification
2017
This paper discusses the characteristics of Birchwood gasification using the simulated results of a Computational Fluid Dynamics (CFD) model. The CFD model is developed and validated with the experimental results obtained with the fixed bed downdraft gasifier available at the University of Agder (UIA), Norway. In this work, several parameters are examined and given importance, such as producer gas yield, syngas composition, lower heating value (LHV), and cold gas efficiency (CGE) of the syngas. The behavior of the parameters mentioned above is examined by varying the biomass particle size. The diameters of the two biomass particles are 11.5 mm and 9.18 mm. All the parameters investigate wit…
Case studies - Research and technological solutions to prevent sand production in the gas wells from the Getic Depression
2021
A frequent challenge encountered in the exploitation of mature gas fields located in the Getic Depression is sand production. Causes of sand production are mainly related to degree of rock consolidation, lithology, increasing water production and production rates. The effects of sand production are multiple such us low productivity of the gas wells, accumulation into the surface equipment, erosion of downhole and surface equipment, plugging the perforation zone and casing damage. The current paper will address the sand production- challenges and new perspectives in remedial work of wells which are producing from gas reservoirs located in Getic Depression. The article presents through some c…
Knock onset prediction of propane, gasoline and their mixtures in spark ignition engines
2016
Gaseous fuels, such as Liquefied Petroleum Gas (LPG) and Natural Gas (NG), thanks to their excellent mixing capabilities and high knocking resistance, allow complete and cleaner combustion than gasoline in Spark Ignition (SI) engines, resulting in lower pollutant emissions, above all if particulate matter is considered. In previous works [1,2] the authors proved how the simultaneous combustion of gasoline and gaseous fuel (NG or LPG) may strongly reduce both fuel consumption and pollutant emissions with respect to pure gasoline operation without a significant power loss. These very encouraging results were obtained thanks to the strong knock resistance increase obtained adding gaseous fuel …
Energy Recovery in Water Distribution Networks. Implementation of Pumps as Turbine in a Dynamic Numerical Model
2014
In complex networks characterized by the presence of private tanks, water managers usually apply intermittent distribution, thus reducing the water volumes supplied to the users, or use Pressure Reduction Valves (PRV) for controlling pressure in the network. The application of Pump As Turbines (PATs) appears as an alternative and sustainable solution to either control network pressure as well as to produce energy. In the present paper, the hydrodynamic model, already presented by De Marchis et al. (2011) was further developed introducing the dynamic analysis of PATs. The model was applied to a district of Palermo network (Italy) characterized by intermittent distribution and by inequities a…
Brownfield management opportunities to reduce the back pressure effects on the gas wells
2017
Gas mature fields are associated with challenges to optimize the hydrocarbon flow from reservoir to the sales point in a cost effective manner due to declining well productivity. Laslau Mare field is a mature gas field in Transylvanian basin (Mures County) developed in 1970s and is producing∼99% methane with low water-gas ratio. As any brown field, the state of depleted reservoir will generate several constraints for gas flow from formation to surface facilities and further to delivery point. During the exploitation has been observed that the operation conditions are facing with unstable pressure in the system due to low demand. Therefore, the back pressure effect will affect the wells in t…